SEN-1101TH
Wireless Temperature/Humidity Sensor with MQTT/API/Modbus support
SEN-1101TH Wireless Temperature/ Humidity Sensor to MQTT/API/Modbus is a wireless based sensor which can measure temperature and humidity precisely. It can be installed for the applications with general, fundamental, or custom control purposes. The measured data can be monitored and obtained through WebGUI or RS-485.
- Easy to install the device and complete the software setup
- Support 2.4GHz Wi-Fi
- Temperature detecting range:0~100°C
- Humidity detecting range: 0~100%RH
- Enable to set a specific temperature/ humidity point to trigger the device to send Telegram messages
- Provide temperature/ humidity free calibration (± 0.1 °C / ± 0.1% )
- Support MQTT/Modbus RTU communication
- Able to integrate with cloud and other services
- Provide SGS certification report
I/O Interface
Wireless
1 x Wireless Module
WiFi 802.11 b/g/n (2.4G)
Up to 150Mbps
RS-485 Serial Port
1 x 2pins-phoenix terminal block
For RS-485 only
Others
Power Supply
9 - 24V DC
Power Consumption
Up to 5W
Operating Temperature
-20°C to 75°C (4°F to 167°F)
Storage Temperature
-40°C to 85°C (-40°F to 185°F)
Enclosure
Plastic
Fixedness
Mounting ear with screws
Temperature Measurement
-40 to +125°C (-40 to +257°F)
Humidity Detection
0 - 100% RH
Device Dimension (WxDxH)
100x80x30 mm (3.9"x3.1"x1.2")
Temperature Accuracy
±0.1°C
Humidity Accuracy
±3% RH
1. Power Input
Connect to power supply (phoenix connector)
2. Power Input
Connect to power supply
3. Button
Button To reset the system
4. RS-485 Serial Port
Connect to other devices with RS-485
Specification Download