THANK YOU.

CAM-3301
Raspberry Pi Camera with 5G support
CAM-3301 Raspberry Pi Camera with 5G support is a 12megapixel camera with 5G supported. Since this camera is designed based on Raspberry Pi4, the software upon this device is very open and flexible. In addition, in order to reflect the performance of 5G and computing capability, we adopt 12 megapixel CMOS as its lens module.
Features
Specs
Panel
Support
  • Adopt Raspberry Pi 4 as the core chip for open platform
  • Up to 12 megapixel resolution
  • Support H.264/H.265 Compression (Customization: MJPEG/HLS/RTMP)
  • Support Onvif protocol
  • Support IP67 for waterproof
  • Clear videos with details in any lighting condition
I/O Interface
Ethernet
1 x RJ-45
100M / 1000M Base-FX SFP
RS-485 Serial Port
1 x 2pins-phoenix terminal block
For RS-485 only
Digital Input
1 x 2pins-phoenix terminal block
Logic Level 0: close to GND
Logic Level 1: open
3000V DC Isolation Protection
Digital Output
1 x 2pins-phoenix terminal block
Relay Output, 125V [email protected], 24V DC@1A
Camera Module
1 x Optic Camera
12 megapixel (SONY IMX477 CMOS)
Camera
Maximum Resolution
12 megapixel
Image Sensor
Progressive Scan CMOS
Mechanical IR Cut Filter
Yes
Horizontal Viewing Angle
59° ±3°
Vertical Viewing Angle
34.6° ±1.6°
S/N Ratio
52dB
Bit Rate
128Kbps - 12Mbps (per stream)
Compression
H.265,H.264, MJPEG
Frame Rate & Resolution
Main Stream: 2MP (1920*1080), Max 60fps
Sub Stream: 2MP (1920*1080), Max 60fps
Network Protocol & Service
IPv4, ICMP, ARP, TCP, UDP, DHCP, RTP, RTSP, RTCP, DNS,
DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, 802.1x
Digital Noise Reduction
2D/3D DNR
Others
Power Supply
9-24V DC
Power Consumption
6W
Operating Temperature
-20°C to 75°C (4°F to 167°F)
Storage Temperature
-40°C to 85°C (-40°F to 185°F)
Enclosure
Plastic
Fixedness
Mounting ear with screws
Device Dimension
210 x 110 x 85 mm (WxDxH)
1. Optical Len
Camera Module
2. Power Input
connect to power supply
3. RS-485 Serial Port
connect to other devices with RS-485
4. Button
to reset the system
5. Power Input
connect to power supply (phoenix connector)
Specification Download