Friendtrol - Products

GW-1101A

WiFi/Bluetooth to DI/O Gateway

GW-1101A WiFi/Bluetooh to DI/O Gateway is the most effective remote control gateway. The major purpose of this device is to convert Modus UTP to Modbus TCP (either way). CTR-3201M1 provides one IP port and two Serial ports for conversion. The two serial ports can be used in the same time. The USB port is left to equip with communication kits, such as BLE dongle.

USD

Features

Specification

Specs

Panel Description

Panel

Cost effective solution for remote control
Digital Output isolation up to 2500Vrms
4 relay outputs (contact rating 30VDC@1A)
Support Modbus RTU
Support MQTT
Support DIN RAIL mounting kit
Support APP for control & status monitoring
Support Bluetooth v4.2 (optional)

I/O Interface
WiFi/BLE Antenna	1 x RF Transceiver WiFi 2.4 GHz BLE v4.2
Serial Port 1 (RS-232)	1 x DB-9 male connector For RS-232 only
DI 1~2	2 x 2pins-phoenix terminal block Rated for 0-24 Volts DC, input impedance 20k Ohms Logic threshold >3.125V low/0 and <1.875V high/1
DO 1~2	2 x 2pins-phoenix terminal block 50mA sink from maximum 24 Volts DC Type: Normal Open
DO 3~4	2 x 3pins-phoenix terminal block 50mA sink from maximum 24 Volts DC Type: Normal Open/Normal Close

Others
Power Supply	9-24V DC (at least 10W)
Power Consumption	6W
Operating Temperature	-20°C to 75°C (4°F to 167°F)
Storage Temperature	-40°C to 85°C (-40°F to 185°F)
Enclosure	Plastic
Fixedness	Mounting ear with screws
Humidity	20 - 80% RH [Not Condensation]
Device Dimension	68x88x27 mm (WxDxH)
Package Dimension	160x130x38 mm (WxDxH)